Friday 31 March 2017

EXHIBITION STAND DESIGN & SETUP FOR CAR-ACCESSORIES-EXHIBITIONS

Pixelmate Exhibits & Designs caters to the car accessories industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Car accessories industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

The car accessories industry could also be refer to automotive aftermarket which is the secondary market of the automotive industry, dealing with the manufacturing, remanufacturing, retailing, installation, and distribution of all auto parts, equipment, chemicals, and accessories, after the sale of the vehicle by the original equipment manufacturer (OEM) to the consumer. The accessories, parts, etc. for sale may or may not be produced by the original equipment manufacturer. The department of commerce under the International Trade Administration reported that “Aftermarket parts are grouped into two sections: accessories and replacement part. Accessories are parts made for convenience, performance, safety, or customization, or comfort, and are designed for add-on after the initial sale of the motor vehicle. Replacement parts are automotive parts remanufactured or built to substitute OE parts as they become damage or worn.

The aftermarket comprises of parts for replacement, appearance, performance and collision, including electric propulsion. The aftermarket supplies a wide range of parts of varying prices and qualities for nearly all vehicle models and makes.

Consumers have the choice of fixing their motor vehicles themselves (the “DIY” or “do-it-yourself” segment) or can take the motor vehicle to an expert repair facility (the “DIFM” or “do it for me” segment). The aftermarket assist in keeping vehicles on the road by allowing consumers the option of where they want their vehicles maintained, customized or serviced.

Just as cloth is very essential in human life to make them presentable before the world, cars also cannot be those successful without car accessories. Accessories are also known to enhance the performance and well as face value of a vehicle. In fact, the development milieu of this section has been so volatile that you can find an accessory for nearly each purpose.

Necessary accessories that are high on their usefulness rate to accessories that simply augment the performance and look of a car, there is everything to tantalize your experience buds. a few of the most common in this regard are car seat cover, car security system, steering wheel cover, roof racks, rear spoiler, gear shift knob, car graphic and car mats. There are also accessories like sport grilles, GPS navigation systems, and alloy wheels, and GPS navigation systems.

Quite some time now, the worldwide market has been unrelenting on a successful trend with a growing amount consumer maintaining the reputation. This obviously describes the never ending train of items that make their way out the producers’ gates. The air is so intensely electrifying that the marketing campaigns of these accessories have covered different grounds like newspaper, billboard, magazine and even the Internet.

The post EXHIBITION STAND DESIGN & SETUP FOR CAR-ACCESSORIES-EXHIBITIONS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-car-accessories-exhibitions/

Wednesday 29 March 2017

EXHIBITION STAND DESIGN & SETUP FOR CAPITAL-GOODS-EXHIBITIONS

Pixelmate Exhibits & Designs caters to capital goods industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Capital goods industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

A capital good is (one that does not quickly wear out) durable goods that is used in the manufacture and production of goods or services. Capital goods are one of the three forms of manufactured goods, the other two being labor and land, which are also refers to as primary factors of production. This categorization emanated during the classical economic period and has remained the main method for classification.

Capital goods are obtained by a society by saving wealth which may be invested in the factor of production. In terms of economics one can believe capital goods to be tangible. They are used to manufacture other goods or services over a certain period of time. Building, Machinery, computer, tools, or other kind of equipment that is involved in manufacturing of other items for sale signify the term of a Capital good. The owners of the Capital good can be household, individuals, corporations or governments. Any item that is used in manufacturing of other goods also is regarded to be capital good.

Many description and definitions of capital goods manufacturing have been proposed. Capital goods are usually regarded one-of-a-kind, capital intensive products that include many mechanisms. They are frequently used as manufacturing systems or services themselves.

Examples include oil rig, battleships, handling systems, baggage and roller coaster equipment. Their production is frequently planned in projects, with numerous parties cooperating in networks (Hicks et al. 2000; Hicks and McGovern 2009; Hobday 1998). A capital good lifecycle usually consists of engineering, tendering, and procurement, manufacturing, maintenance commissioning, and (sometimes) decommissioning (Blanchard 1997; Hicks et al. 2000; Hobday 1998; Vianello and Ahmed 2008).

One should differentiate capital goods from consumption goods, as the aim of their purchase is quite different from the manufacturing stage. An example of it is a good car, which is usually considered to be a customer good as it is bought for a domestic usage. Nevertheless, dump trucks used by construction or manufacturing companies are clearly production goods. The motive is that they help in creating things like dams, road, bridges or buildings. Meanwhile, a chocolate candy bar is a consumer good, but the machines that are used to manufacture the candy would be considered capital goods. Some of the capital goods can be used in both manufacture of consumer goods or production ones, such as machinery for production of dump trucks. It is usually considered that the consumption is the logical outcome of all economic activity.

The post EXHIBITION STAND DESIGN & SETUP FOR CAPITAL-GOODS-EXHIBITIONS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-capital-goods-exhibitions/

EXHIBITION STAND DESIGN & SETUP FOR CAMPING-AND-CARAVANING-TRADE-FAIRS

Pixelmate Exhibits & Designs caters to the camping and caravanning industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Camping and caravanning industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

Camping is an outdoor recreational activity on nights away from home in a shelter such as a tent, caravan or camper. Participants leave the developed area to spend time outdoors in the most natural looking environment for activities that provide them with satisfaction. To qualify as “camping” at least one night is spent outdoors, differentiating it from picnicking, day tripping and other similarly short term recreational activities.

Luxury may be an integral part, such as an African safari in the early twentieth century, but including accommodation in a fixed structure such as a fully equipped sports facilities a high level under the banner of “camping”

Camping as a activities recreational became more famous among the elites of the early 20th century. Finally, it has grew more democratic and diverse. Modern campers often have natural resources, such as national and state parks, wilderness areas and commercial campgrounds. The camp is a key component of many youth organizations around the world, such as scouting, which use it to learn both self dependence and teamwork.

Camping and caravanning Club began in 1901 as an association of cycle campers Thomas Hiram Holding one of the founders, is regarded by many as the father of modern camping. He also establishes the touring Cycling Club in 1878, which became a cyclist Travel Club, now renamed the cycling UK. Camper’s manual was written in the 1908, to share the enthusiasm for the outdoors. His love of camping emanated from his experiences as a boy, which dated back to the middle of 1800.

In 1906 the Association of Cycle Campers launched its first camping site, in Weybridge. By that period the organization had numerous hundred members. In 1909 the Association divided into three different organizations, which united again in 1910 as the National Camping Club. Two more name changes followed, in 1919 (The Camping Club of Great Britain and Ireland) and in 1983. Membership rose to 100,000 in 1967 and more than 300,000 by the end of the 20th century.

an ongoing media publicity to motivate journalists to try caravanning for themselves. Indigenous Camping and Caravanning Week was established in the centenary year to set a proof for the most populace camping and caravanning at the same time. In 2003, the published figure for number of people camping out overnight on 24 May was 92,435.

The World Tent Pitching Championships has made much to boost the profile of the club.

The post EXHIBITION STAND DESIGN & SETUP FOR CAMPING-AND-CARAVANING-TRADE-FAIRS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-camping-caravaning-trade-fairs/

EXHIBITION STAND DESIGN & SETUP FOR BUSINESS-TRADE-FAIRS-EXHIBITIONS

Pixelmate Exhibits & Designs caters to the business industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Business industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

A business (also known as a firm, an enterprise or a company) is an organizational entity concerned in the provision of goods and services to customer^. Businesses serve as a form of economic activity, and are widespread in capitalist economies, where the majority of them are privately owned and supply goods and services owed through a market to customers and consumer in exchange for other goods, services, money, or other types of exchange that hold intrinsic economic value. Businesses can also be social non-profit entity or state-owned public enterprises operated by governments with precise economic and social objectives. A business established by numerous private persons may form as an incorporated company or jointly organize as a partnership. Countries have diverse laws that can assign diverse privileges to the different business entities.

The word “business” can refer to a specific organization or to the market sector (for example: “the agricultural sector”) or to the total of all economic action (“the business sector”). Compound forms such as “agribusiness” describe subsets of the concept’s wider meaning, which cover all activity by distributor of goods and services.

Businesses objective is to maximize sales to have their revenue surpass their expenditures, resulting in a gain, surplus, or profit.

Types of business ownership vary by jurisdiction:

Sole proprietorship: this is also known as a sole trader, is owned by single individual and operates for their advantage. The owner runs the business alone and may employ employee. A sole trader has unlimited liabilities for all activities and obligation incurred by the enterprise, whether from judgments or operating cost against the business. All assets of the enterprise belong to a sole proprietor, including, for example, inventory, computer infrastructure, equipment, retail fixtures, real property as well as manufacturing owned by the sole proprietor.
Partnership: this is an enterprise established and owned by two or more people. In most types of partnerships, every partner has unlimited liability for the liability incurred by the enterprise. The three most common types of partnerships are: limited partnerships, general partnerships, and limited liability partnerships.
Corporation: The owners of a corporation have a limited liability and the business has a separate legal entity from its owners. Corporations can be either privately owned or government owned. They can establish either for profit or a nonprofit organization. A privately owned, Profit Corporation is owned by its shareholders, who elect a board of directors to manage the corporation and employ its managerial staff.

The post EXHIBITION STAND DESIGN & SETUP FOR BUSINESS-TRADE-FAIRS-EXHIBITIONS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-business-trade-fairs-exhibitions/

EXHIBITION STAND DESIGN & SETUP FOR BUS-EXHIBITIONS

Pixelmate Exhibits & Designs caters to the bus industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Bus industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

A bus (archaically also autobus, motorbus, omnibus, multibus,) is a road vehicle manufactured to carry several passengers. Buses can comprise a capacity as high as 300 passengers. The most popular type of bus is the single-decker rigid bus, with bigger loads carried by articulated bus and double-decker, and smaller loads carried by minibuses and midibuses; coaches are used for longer-distance services. Various types of buses, such as inter-city coaches and city transit buses, charge a fare. Other types, such as elementary or secondary school shuttle buses within a post-secondary education campus do not charge a price. In many jurisdictions, bus drivers need a special license beyond and above a regular driver’s license.

Buses can be used for schedule coach transport, school transport, tourism, private hire or scheduled bus transport; promotional buses may be used for political campaigns and others are privately operated for a broad range of purposes, including pop band tour vehicles and rock.

Horse-drawn buses were used from the 1820s, followed by steam buses in the 1830s, and electric trolleybuses in 1882. The first motor buses or internal combustion engine buses were used in 1895. Recently, interest has been develop in fuel cell buses, and electric buses, hybrid electric buses, as well as ones powered by biodiesel or compressed natural gas. As of the 2010s, bus production has increasingly globalised, with the same designs showing all over the world.

Bus is a clipped form of the Latin word omnibus. The first horse-drawn autobus service was started by a businessman named Stanislas Baudry in the French city of Nantes in 1823. The first bus parked in front of the store of a hatter named Omnés, which had a great signal reading “Omnes Omnibus”, a pun on the Latin-sounding name of that hatter; omnes describes “all” and omnibus means (among other things) “for all” in Latin. Nantes populace soon gave the nickname omnibus to the vehicle. The omnibus in Nantes was a triumph and Baudry moved to Paris and introduced the first omnibus service there in April 1828. The same service was launched in London in 1829

The first automatically propelled omnibus appeared on the streets of London on 22 April 1833. Steam carriages were much less likely to overturn, they travelled faster than horse-drawn carriages, they were cost effective to run, and caused much less harm to the road surface because of their wide tires.

The post EXHIBITION STAND DESIGN & SETUP FOR BUS-EXHIBITIONS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-bus-exhibitions/

EXHIBITION STAND DESIGN & SETUP FOR TRADE-FAIRS-FOR-BUILDING-SERVICES-ENGINEERING

Pixelmate Exhibits & Designs caters to the building service engineering industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Building service engineering industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

Building services engineering, architectural engineering, technical building services, facility and services planning engineering or building engineering refers to the execution of the engineering for the internal environment and impact of the environment on a building.

Building services engineers are in charge of the design, installation, operation and monitoring of the electrical, mechanical, and public health systems needed for the comfortable, safe and environmentally friendly operation of contemporary buildings. The term building services engineering is commonly used in the Ireland, Canada, Australia and United Kingdom, but in the United States of America, the field is also known as building engineering or architectural engineering, though these words can also have other meanings, even in the United States. the engineers are known as facilities planners in India.

Building services engineer work directly with other construction expert such as architects, quantity surveyors and structural engineers. They influence the architecture of a building play is a significant role on the energy demand and sustainability of a building. Within building services engineering, new task are emerging, for example in the areas of renewable energy, energy management, and low carbon technologies. With buildings accounting for around 50% of all carbon emissions, building services engineers play an important role in combating climate change. As such, a typical building services engineer has a wide-ranging career path:

Design Management -Design management refer to business side of design, which objective is to create the appropriate environment to support and control a culture of innovation and creativity, and to encourage the creative nature of design involving the many areas that, collectively, will bring design solutions – and all at the same time making sure that an organization’s commercial aims and objectives are achieved and that all the task is done in an ethically sound way.

Naturally the building service engineering installation is value 30–60% of the total worth of a contract; Design management is not related to project management. Project management concentrate on a broad range of administrative skills but is not usually sympathetic to the peculiarities of delivering a completely coordinated functioning design, taking into consideration its sole nature and dealing with the dynamic requirements of clients and the external factors over which there is little control.

Many building services organization use computer-aided design (CAD) and computer-aided engineering software programs developed either in-house or by external parties, to help in their system analysis and design. This method has many advantages, including convenient and more exhaustive visualization of proposed solutions, the ability to create virtual models for calculation and analysis, and the ease of use in spatial planning.

The post EXHIBITION STAND DESIGN & SETUP FOR TRADE-FAIRS-FOR-BUILDING-SERVICES-ENGINEERING appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-trade-fairs-building-services-engineering/

EXHIBITION STAND DESIGN & SETUP FOR TRADE-FAIRS-FOR-BUILDING-MATERIALS

Pixelmate Exhibits & Designs caters to the building material industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Building material industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

Building material is any material which is used for construction purposes. Many natural materials such as clay, stone, sand and wood, even twigs and leaves have been used for the construction of the building. Apart from natural materials, many artificial products are used, some more and some less synthetic. Production of building materials is a well established industry in many countries and the use of these materials are generally divided into certain specialties, such as windows, insulation, plumbing and roofing work.

They provide habitat composition and structures, including homes.

Historically there are trends in building materials from being natural to become an artificial and composite; Biodegradable to evergreen; The local to being transported in the world; repairable to disposable, chosen for enhance level of fire safety and improve the seismic resistance. These trends intend to increase the starting and future economic energy, ecological and social cost of building materials.

Construction materials are products that are used to build houses and other buildings. There are many types of materials used to build houses. In some countries, the materials are used depending on weather conditions.

Many types of building materials are used in the construction industry to create objects and structures.

Basically, the building materials are classified into two types: natural and synthetic materials. Synthetic materials are those of a man-made, while natural materials are those that, of course, have their origin naturally.

These categories of products and materials used by architects and construction project managers specify the materials and methods used for construction projects.

Some of construction material, such as cold rolled steel framing is considered modern methods of construction over the traditional slower methods such as block work and wood. Many building materials have different purposes, so it is always a good idea to check with the manufacturer that the product best suited to your needs. Traditionally, the type of building materials for the construction was mud, rocks and brush. The mud was used to fill the space between the bricks and concrete, and to act as insulation. For centuries, the house made entirely of dirt and clay. This was followed by the use of rocks (mainly granite) as a construction material. From the Neolithic period to the middle Ages to modern times, granite commonly used as building material. Brush structures are usually seen in tropical areas, made entirely from plant parts such as twigs, bark, twigs and leaves.

Construction and Building Materials provides an international forum for the broadcasting of research and development in the field of building and constructing materials and their application in new works and repair practice.

The post EXHIBITION STAND DESIGN & SETUP FOR TRADE-FAIRS-FOR-BUILDING-MATERIALS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-trade-fairs-building-materials/

EXHIBITION STAND DESIGN & SETUP FOR BUILDING-CONSTRUCTION-TRADE-SHOWS

Pixelmate Exhibits & Designs caters to the building construction industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Building construction industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

Construction of the building is generally share more residential and non-residential (commercial / institutional). Infrastructure is often called heavy / highway, heavy or heavy engineering. This includes public works, dams, bridges, roads, water / waste water and utility distribution. Material including refineries, chemical processing, power generation, factories and production plants. There are other ways to break the industry in sectors or markets.

Construction process refers to the construction of building or infrastructure. The construction differs from manufacturing because manufacturing usually involves the mass production of the manufacture of similar products, without a designated customer, while a construction usually takes at the site for a known customer. Construction as an industry includes six to nine percent of gross domestic product of advanced countries. The construction begins with the planning, design and financing; this continues until the project is built and ready for use.

Generally, there are three areas of construction: buildings, infrastructure and industrial.

Large-scale construction needs collaboration among several disciplines. An architect usually controls the job, and a construction manager, engineer, design, project manager or construction engineer supervises it. For the successful implementation of a project, adequate planning is important. Those concerned with the execution and design the infrastructure in question should consider zoning requirements, the environmental impact of the task, the successful budgeting, construction-site safety, transportation and availability of building materials, budgeting, logistics, inconvenience to the general public caused by bidding and construction delays etc. The largest construction projects are referred to as megaprojects.

General, there are three areas of construction: infrastructure, buildings, and industrial. Building construction is typically further divided into residential and non-residential (institutional/commercial). Infrastructure is usually refer to heavy or highway, heavy engineering or heavy civil. Such as large public works, bridge, dams, highways, water/wastewater and utility distribution. Industrial includes refineries, power generation, and mill, process chemical and manufacturing plants. There are other ways to break the industry into market or division.

Construction is the process of adding the structure of real estate or construction of buildings. Most construction jobs are small renovations, such as adding a room or renovating a bathroom. Often, the owner of the property acts as an employee, paying agent, and the design team for the entire project. Although construction projects usually include several common elements, such as design, financial considerations and legal assessment, many projects of varying sizes reach undesirable end results, such as debris, excessive costs and / or litigation. For this reason, those who have experience in the field make detailed plans and maintain a vigilant watch on the project to ensure a positive outcome.

The post EXHIBITION STAND DESIGN & SETUP FOR BUILDING-CONSTRUCTION-TRADE-SHOWS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-building-construction-trade-shows/

EXHIBITION STAND DESIGN & SETUP FOR BROADCAST-TECHNOLOGY-EXHIBITIONS

Pixelmate Exhibits & Designs caters to the broadcasting technology industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Broadcasting technology industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

Broadcasting can be describe as the distribution of audio and / or video, or other messages to a dispersed public through any electronic media, but usually by means of the electromagnetic spectrum (radio waves) in the model of one too many. Broadcasting started with the AM radio, which came into popular use in the 1920s, with the expansion of the radio transmitter and the receiver vacuum tubes. Previously, all forms of electronic communication (radio, telegraph and telephone) were at the start, one to one, with a message to one recipient. The term “broadcasting”, taken from the farming methods of planting seeds in the field by casting them widely about was invented by KDKA director Frank Conrad RCA historian George Clark In 1920 to differentiate this new activity of “one-to-many”; communication; a sole station broadcasting to multiple listeners.

Over the air broadcasting is usually linked with television and radio although in recent years, radio and television transmission began to be distributed by cable (cable TV). The receiving parties may include the entire public or relatively small subset; the fact is that anyone with the necessary receiving equipment and technology e.g. radio or television set) will receive a signal. The Field of broadcasting services includes both government-managed services such as public radio, private commercial radio, public television and community radio, commercial television and public television. The Federal regulations of the United States, title 47, section 97, defines Broadcasting as the transmission aimed for reception by the public, either directly or relayed. Private or two-way telecommunications transmissions are not eligible under this definition.) For example, citizen band and amateur Radio operators are not allowed to broadcast. as defined,” broadcasting” and transmitting “are not the same.

Transmission of television and radio programs from radio or television stations to the home receiver by radio waves is referred to as “over the air” (OTA) or terrestrial broadcasting and in most countries require a license to broadcast, Transmission using a cable or wire such as cable television or a cable (which also rebroadcasts OTA stations with their consent) are also considered broadcast, but does not necessarily require a permit (although in some countries, a license is required). In the 2000s, television shows and radio programs via digital streaming technology is increasingly called the broadcasting and, although strictly speaking this is incorrect.

Originally, the entire broadcasting consists of analog signals using analog transmission techniques, but in 2000, the media have changed to digital signals using digital transmission. Generally broadcasting frequently refers to the dissemination of information and entertainment programming from several sources to the general public.

The post EXHIBITION STAND DESIGN & SETUP FOR BROADCAST-TECHNOLOGY-EXHIBITIONS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-broadcast-technology-exhibitions/

EXHIBITION STAND DESIGN & SETUP FOR BREWING-TRADE-FAIRS

Pixelmate Exhibits & Designs caters to the brewing industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Brewing industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

Brewing is the manufacture or production of beer by starch source (generally cereal grains, the most common of which is barley) in water and fermenting the resultant sweet liquor with yeast. It can be done at home by a homebrewed, in a brewery by a commercial brewer, or by a variety of conventional methods such as communally by the local peoples in Brazil when making cauim Brewing has being in existence since around the 6th millennium BC, and archaeological proof suggests that emerging civilizations including Mesopotamia and ancient Egypt brewed beer. Brewing industry has been part of most western economies since the nineteenth century.

The basic material of beer is fermentable starch source such as malted barley and water. Most beer is fermented with a flavored with hops and brewer’s yeast. Less generally used starch sources include sorghum, cassava, and millet. Secondary sources (adjuncts), such as rice, maize (corn), or sugar, can also be used, sometimes to minimize cost, or to include a feature, such as adding wheat to help in retaining the foamy head of the beer. Grain bill is the proportion of each source of starch in a beer recipe.

Steps in the brewing process include malting, milling, lautering, mashing, fermenting, conditioning, boiling, filtering, and packaging. There are three major fermentation methods, spontaneous, cool and warm. Fermentation may take occur in an open or closed fermenting vessel; a secondary fermentation can also occur in the bottle or cask. There are various additional brewing methods, such as double dropping, Yorkshire square and barrel aging.

A brewing company or brewery is a business that produces and sells beer. The premises at which beer is commercially produce is either called a beerhouse or a brewery, where diverse sets of brewing equipment are called plant. The commercial brewing of beer has been in existence since at least 2500 BC; in ancient Mesopotamia, brewers got social sanction and divine shield from the goddess Ninkasi. Brewing was at first a cottage industry, manufacturing taking place at home; by the ninth century farm and monasteries would manufacture beer on a larger scale, marketing and by the eleventh and twelfth centuries larger, devoted breweries with nine to ten workers were being built.

Diversity of size in breweries is synchronized the diversity of processes, degrees of automation, and typed of beer manufacture in breweries. A brewery is generally divided into types sections, with each section reserved for one part of the brewing process.

The post EXHIBITION STAND DESIGN & SETUP FOR BREWING-TRADE-FAIRS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-brewing-trade-fairs/

EXHIBITION STAND DESIGN & SETUP FOR BABY-FAIRS

Pixelmate Exhibits & Designs caters to the bay industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Baby industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

Once the phenomenon of licensing the brand began to grow, there were tons of products being sold mainly to children and all the entire industry extended. Babies develop skills when surrounded by familiar character they want on the screen, their clothing, and crib mobile, so that parents are encouraged to buy more and more products.

Advertisers comprehend that getting brand and character in front of babies creates an attachment which is then leverage later when the children demand some products with these images,” said Josh Golin, executive director of the campaign for commercial free childhood a nonprofit profit making organization by linn in the 2000 these days, it’s hard to find products such as bottle, glasses, diapers, and sippy cup that do not have these media focusing on children.

It is expected that the awareness of parents about nutrition, hygiene and safety for babies drive the market over the forecast period. Greater participation of women in the labor force has increased the capacity of consumption, which should boost the market for baby products. Baby products manufacturers focus on producing ready-to-use with superior quality to increase the number of customers who buy products for babies.

The segment of baby cosmetics and hygiene products held largest market share in the whole market. Increased awareness of parents on the soft and sensitive baby skin as stimulate demand for cosmetics and baby supplies, and this trend is expected to continue over the forecast period. Baby health care Experts have attracted the attention of parents to the child’s health, which is forecasted to increase growing segment of cosmetic products for babies and toiletries for the future years. The segment of baby food products is growing because of the nutritional value that are found in infant formula ready for use that are better compared to baby food bread. In addition to the increasing urbanization and a growing number of women are well prepared for baby food. It is expected that the growing awareness of parents about the nutritional aspects of baby food stimulate the baby food market over the forecast period.

The post EXHIBITION STAND DESIGN & SETUP FOR BABY-FAIRS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-baby-fairs/

Sunday 26 March 2017

EXHIBITION STAND DESIGN & SETUP FOR FOOD-BEVERAGE-TRADE-SHOWS

Pixelmate Exhibits & Designs caters to the food and beverages industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Food and beverages industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

The beverage industry can be describe as the industry that manufacture drinks, in condition ready to drink beverages. Beverage manufacturing can differ significantly depending on the beverage being produced. ManufacturingDrinks.com describes that, “bottling materials are different in the form of bottling lines they operate and the form of item they can produce. Other bits of needed information include the study of if term beverage is bottled or canned (glass or plastic), cold-fill or cold-fill or hot-fill, and conventional or natural. changes in the beverage industry, catalyzed by requirements for non-alcoholic beverages, include: beverages processing, beverage plants, and beveraghoe packing.

Water filtration technique in a Food and Beverage materials, In a distinctive Food and Beverage material there are numerous diverse water and process technique, each needing its own precise stage of water cleanliness. The existence flows and cleanliness of each of these rivers is motivated by the Food and Beverage plant design, e.g. dry-goods, soft drink, canning, and brewery.

These will include:

Pre-treatment of surface, well, or city water
Boiler water treatment
Condensate treatment
Process water treatment
Sterilization and cleaning service
Water Hygiene Service
Waste water disposal.

Regardless of the program, there is a good chance that some type of industrial filtration of water necessary for the implementation of food and drinks to work with maximum efficiency.

Definition of the type of water filtration system

Options for filtering water can be divided into two categories based on the granule membranes and filtering media used granular. Filtering by granular water has been in existence for years in the food and beverage industry, and will be understood to most people. Examples granulate media filtering include sand filters; odor, activated carbon filter for taste, taste, odor and chlorine removal; Anthracite filters; Garnet and fine time.

These kinds of filters can remove the suspended particles from about 10 microns (1 micron = 10-6 m). With the use of certain polymeric coagulants or brought before these filters (as filter aids introduced) flocculation, some success has been observed in the removal of particles of 1 micron.

Separating the particles of the filtering media like discrete filtering media function as pore. Suspended solids retained by the filter are collected above the bed media filter, or in the pores.

Water membrane filtration makes use of membrane to remove particulates. Unlike granular filter, the membrane pores are designed to be removed particle and may be much smaller particles. The final membrane filtration is reverse osmosis (RO), wherein the dissolved solids (metal ions) can be removed. This is not a good mechanism of filtration in the true sense of the word, such as semi-permeable membrane used in the RO Have pores. It already can be seen as a process of demineralization.

The post EXHIBITION STAND DESIGN & SETUP FOR FOOD-BEVERAGE-TRADE-SHOWS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-food-beverage-trade-shows/

EXHIBITION STAND DESIGN & SETUP FOR AGRICULTURE-TRADE-SHOWS

Pixelmate Exhibits & Designs caters to the agricultural industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Agricultural industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

Agriculture is the cultivation and breeding of plant, fungi, animals, for food, biofuel, fiber, medicinal plants and other products used for the improvement and maintenance of human life. Agriculture was a major development in the increase of sedentary human civilization, whereby agriculture of native species produced excess food that nurtured the growth of civilization. The study of agriculture could be regarded as agricultural science. The history of agriculture could be traced back to thousands of years, and its improvement has been defined and driven by wholly different, technology, climate, and a very different culture. Industrial agriculture is based on large-scale monoculture agriculture has happen to be the principal agricultural methods.

Modern agronomy, agrochemicals, plant breeding, such as fertilizer and pesticide, and technological advancement have increased in many cases the yields from cultivation, but at the same vein this have caused extensive ecological problem and negative effects on human health. Modern practices and Selective breeding in animal husbandry have similarly improved animal meat production, but expressed concern about the welfare and health effects in animals’ antibiotics, growth hormones and several chemicals generally used in industrial meat production. Agricultural food production and water management are all global issues that stimulate debate on several fronts. In recent decades there has been a significant degradation of water resources and land, including the depletion of aquifers and the impact of global warming on agriculture and agriculture on global warming is not always understood.

The main agricultural products can be categorized into fibers, foods, fuels and raw materials. Specific foods include grains, fruit, and vegetables, oils, and spices meat. The fibers are cotton, wool and silk, hemp, silk and linen. Raw materials are bamboo and wood. Other valuable resources are produced by plants, such as dyes, medicine, perfumes, biofuels and decorative products, such as nursery plant and cut flowers. More than one third of workers around the world are employed in agriculture, only pushed the service sector.

An Agricultural exhibition is a public event that shows the equipment, animals, sports and recreation related to the agriculture and livestock. It comprise a livestock show an event in which breeding stock is exhibited, competition, entertainment and trade fair. The work and practices of farmers, zoologists, cowboys and animal lover. The term agricultural exhibition and livestock exhibition are similar with the North American term of state fair and county fair. Agricultural exhibition has helped the agricultural industry in achieving their aim and objectives.

The post EXHIBITION STAND DESIGN & SETUP FOR AGRICULTURE-TRADE-SHOWS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-agriculture-trade-shows-2/

EXHIBITION STAND DESIGN & SETUP FOR BOAT-SHOWS

Pixelmate Exhibits & Designs caters to the boat industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Boat industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

A boat is a watercraft of a wider range of sizes constructed to plane, float, travel or work on water. Small boats are normally seen on inland waterways (e.g., lakes and rivers) or in confined coastal areas. Though, boats such as the whaleboat were constructed for action from a ship in an offshore setting. In naval language, a boat is a ferry small sufficient to be contained aboard another ship. Another less limiting meaning is a boat that can be carried out of the water. Some meaning do not make a clarification in size, as mass freighters 1,000 feet (300 m) long on the Great Lakes are referred oreboats. For reasons of submarines or naval tradition, are usually regarded to as ‘boats’ rather than ‘ships’, not considering of their shape and size. Boats are usually differentiated from ships based on their shape, larger size, passenger capacity or cargo.

Boats have a broad diversity of sizes, shapes and construction methods due to their anticipated function, local tradition and available materials. Canoe-form of boats has been in existence since early times and a range of versions are used throughout the world for fishing, sport, and transportation. Fishing boats vary broadly in style fairly to match local circumstances. Pleasure boats include sail boat, pontoon and ski boats. House boats can be used for long term housing or vacationing. Small boats can convey cargo or offer transport (lightering) to and from large ships. Lifeboats have safety and rescue functions. Boats can be function by wind power (e.g., sailboats), motor power (e.g., propeller-driven motorboats driven by gasoline or diesel engines) and human power (e.g., rowboats).

We all aware of what boat really is, they are small concave structures that float on the water surface. This may be a paper boat or wooden boat in real life; the ships are always the same and serve the same purpose. They assist people by means of transport animals and many other things through the water labyrinth of rivers and oceans and low current. We all made paper boats when we were kids and we saw it floating on the water park.

Finally, ships have evolved and ships and boats are design has changed dramatically. We now have a variety of ships, each suitable for a particular purpose. We race yachts, sailboats, cruise ships, ships at sea, river ships, upstream and many others. This article will end only with the names of different types of boats that are available today and is used to date. Well, we are here to talk about boats and ship design that we use. So let me briefly mention some of these ships and boats design. We have the small sized and the big sized ship.

The post EXHIBITION STAND DESIGN & SETUP FOR BOAT-SHOWS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-boat-shows/

EXHIBITION STAND DESIGN & SETUP FOR BIOTECHNOLOGY-CONFERENCES-AND-TRADE-SHOWS

Pixelmate Exhibits & Designs caters to the biotechnology industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Biotechnology industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

Biotechnology is the use of living systems and organisms for the development or production of products or “any technological application that uses biological systems, derivative or living organisms to modify or make process or product for specific use” (UN Convention on biological diversity) based on the tools and applications, it often overlaps with similar areas of biological engineering, molecular engineering, biomedical and engineering, bioproduction.

Mankind benefits from biotechnology in food production, medicine and agriculture. It is believed that the term was coined in 1919 Hungarian engineer Károly Ereky. At the end of the twentieth century and early twenty-first century, biotechnology has expanded to include new and different sciences, such as, genetic recombination techniques, genomics, applied immunology, and the advancement of diagnostic test sand drugs.

The field of biotechnology is vast, and it is often difficult to keep track of biotechnological advances. Biotechnology includes various aspects of agriculture, industry, environment and health. However, the biggest field of biotechnology is the health care industry. The development of biotechnology health care is the most fun to follow to keep track record.

So how do you get information similar to biotechnological advances? Since many medical advances in biotechnology such as cloning, are often controversial, look no further than your news to get such information. You can also search online or look in scientific journals.

Some of the most significant biotechnological advances in recent years have to do with the field of genetics. Mapping of the human genome is a key to the understanding of the human body, for instance. There are other biotech advances in other areas. An example of this is agriculture because farmer has already commenced to plant biotechnology crops. The question of ethics came up in the field of biotechnological advances. It seems that there are two areas of concern for some people. The issue of cloning is much talked about. Is it ethical to clone life? Is it ethical to clone a human life? These are the questions people need answers to and probably will experience in the coming years. Another ethical problem is the search stick to the cells. Stem cells have the potential to benefit people with Parkinson’s disease and other diseases. Biotechnological advances are often the subject of fascination. It’s amazing that scientific progress has enabled us to do. We mapped the human genome. Can we clone? Stem cells show great promise. It is fascinating to follow up on the field, because it is exciting to anticipate advances in biotechnology will be made next.

The post EXHIBITION STAND DESIGN & SETUP FOR BIOTECHNOLOGY-CONFERENCES-AND-TRADE-SHOWS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-biotechnology-conferences-trade-shows/

EXHIBITION STAND DESIGN & SETUP FOR TRADE-FAIRS-AND-EVENTS-FOR-BIOGAS

Pixelmate Exhibits & Designs caters to the biogas industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Biogas industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

Biogas generated if left decomposition of organic matter in closed tanks of air at a suitable temperature (20-40 degrees C). The process which is a product called “anaerobic digestion”. Biogas is a mixture of methane and carbon dioxide (CO2), and is made generally contaminated with quantities of hydrogen sulfide (H2S) when they were first produced.

The main sources of biogas are many: for disposal of municipal solid waste (MSW) that produce landfill gas (LFG), for treatment of waste water (sewage), large industrial facilities and farm livestock. It can also be manufactured from manure and waste community or even household toilet waste. In this case, each household produces its own biogas by building a small toilet-attached AD factory, which is very common in India, china and many other developing countries.

Anaerobic digestion may be used for treating the separated fraction of municipal waste or combined with the mechanical systems of classification, in the treatment of municipal waste mixed waste. These facilities are referred to as mechanical biological treatment (MBT).

Biogas, which is also referred to biomethane, is about twenty percent lighter than air. It is a colorless and odorless gas that burns with clear blue flame which is the same thing as that of LPG. Biogas is a quality fuel.

It can be used to power the motor with electricity; waste heat can be used at the plant, while producing both heat and power. The emitted heat can also be used for drying and heating process.

Biomethane is a great opportunity because it is being seen worldwide as an untapped source of energy that, after pretreatment and recovery, can be used to provide part of the natural gas needs of the nation. A number of new projects by the US government under the auspices of this reason are being sponsored. It is a regenerative fuel (renewable) with better efficiency of production of biogenic fuels. Likewise, we should not compete with the production of human food, if basic materials are all waste. Biogas consists mainly of methane (CH 4), a gas that may be burned to manufacture electricity and heat. Treated manure can become a high agronomic value of organic fertilizers. It is most commonly collected and channeled to an engine-generator where it pass through combustion to electricity. Meanwhile, when the power generation is a loss of efficiency during transfer which would not occur if the fuel is used directly where energy is consumed. It would be more efficient to use the word in the vehicle in a place where it is consumed energy. It can be compressed, such as natural gas, and is used to power motor vehicles. Natural gas and biogas can be used in petrol vehicles relatively easily, but some adjustments are necessary for the engine.

The post EXHIBITION STAND DESIGN & SETUP FOR TRADE-FAIRS-AND-EVENTS-FOR-BIOGAS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-trade-fairs-events-biogas/

EXHIBITION STAND DESIGN & SETUP FOR TRADE-FAIRS-FOR-BIOENERGY

Pixelmate Exhibits & Designs caters to the bioenergy industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Bioenergy industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

Bioenergy is modern energy can be from materials derived from biological sources. Biomass can be described as organic material which store sunlight as chemical energy. Being a fuel may include wood, wood waste, manure, sugarcane, straw, and many other products from variety different agricultural processes.

Renewable

In the narrowest intelligence is another meaning to biofuels, which is a fuel obtained from biological sources. In the wider sense includes biomass, biological material used as biofuel, as well as economic scientific, social, economic partners, the scientific and technical use of organic sources of energy. It is a misconception that bioenergy extracts energy from biomass is a biomass fuel from the biomass, and the energy contained in the fuel.

There is a slight tendency word bioenergy is favored in Europe with respect to biofuels in America

One advantage of biomass fuels is often a by-product waste or residue from other processes, such as agriculture, livestock and forestry. In theory, this means that there is no competition between food and fuel manufacturing, although it is not usually the case. The use of land, existing industries and appropriate conversion technologies should be considered relevant for the assessment of the relevance of biomass as raw material for energy.

Biomass is item acquired from newly living organisms, including plants, animals and animal products. Manure, crop residue and garden waste are all sources of biomass. It is a renewable energy origin based on the carbon cycle, unlike other natural resources such as coal, nuclear fuels and petroleum. Other sources include animal manure, which are stable and substantially unavoidable impurities manufactured majorly by the animal products in industrial-sized farms. Bio energy is the answer, whether we like it or not, our planet suffers from our greed and intensive use fossil fuels such as oil, gas, electricity consumption, and coal and we have to find another source of renewable energy to supply our energy now and in the future. Our present conventional resources of fuel are running out and causing harm to the environment, and that is why there is so much investment in exploring new ways to provide energy for our daily lives, such as lighting and heating and operation of our vehicles. There has been investment and endless research in the development of alternative fuels for daily transportation of our cars in cargo and in recent years, the race was among the major car manufacturers to look for ultimate moderate cost with high efficiency motor that each individual could afford.

The post EXHIBITION STAND DESIGN & SETUP FOR TRADE-FAIRS-FOR-BIOENERGY appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-trade-fairs-bioenergy/

EXHIBITION STAND DESIGN & SETUP FOR BIO-CONFERENCES-AND-FAIRS

Pixelmate Exhibits & Designs caters to the bio-conference industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Bio-conference industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

Biotechnology is technology targeted organic molecular and cellular processes. Improvements in the field of biotechnology point to produce technologies that will enrich the land and lives. While biotechnology itself is wide, assistance to attend the conference of biotechnology, as much as possible, because the advantage of discussing topics related to the main speakers and guests, as you can find, networking opportunities, inspiration and all kinds of interactions on the site.

Biotechnology is the use of living systems and organisms for the development or production of products or “any technological application that uses biological systems, living organisms or derivatives thereof, to make or modify products or processes for specific use” (Convention biodiversity UN, art. 2) . [1] According to the tools and applications, often overlapping field (partner) Bio-engineering, biomedical engineering, bioproduction, molecular engineering.

Discuss relevant issues

Problems and solutions still being discussed in the biotechnology conference. You have people who work as engineers organic, while others may work as a pharmaceutical engineer. The goal is, however, to improve the lot of humanity and the planet. Issues related to biotechnology will be held in the open air, and from other colleagues.

Speakers and guests

Typically, the biological conference, there are speakers and guest speakers. These people are professionals who have worked in their field for a long time. Benefits, as they may be at the point in your career you want to be one day. Listen to them an idea of their career. You can even ask important questions at the end.

NetworkingOrganic Conference, networking is very likely. Jobs and internships often occur here, although the association with strangers can be intimidating. If you are looking for a chemist or chemical engineer, in cooperation with experts in these sectors can be vital. With networking, teamwork is emphasized and foundations. This gives the team a forum to discuss a number of technologies, tools, processes, and how these things can be applied to companies. In addition, workflow, data products and methods will be improved with the use of teamwork. InspirationAt a conference of biotechnology is a winning proposition because it is very inspirational. In many of these sets are members of insightful panel race. They are professionals who have the opportunity to interact with others who provide feedback on specific work experience and to acquire that dream job.

The post EXHIBITION STAND DESIGN & SETUP FOR BIO-CONFERENCES-AND-FAIRS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-bio-conferences-fairs/

EXHIBITION STAND DESIGN & SETUP FOR BICYCLE-FAIRS

Pixelmate Exhibits & Designs caters to the bicycle industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Bicycle industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

The bicycle with engine that is commonly called a motorized bike. This type of bike has a motor attached which is used to assist the driver when to sell. These engines run on electric. Engines on bicycles may slightly help the driver to drive the bike in rough terrain. Electric motors drive most bikes for longer distances. Electricity in these bikes is powered by rechargeable batteries. Engines for sale are available in very few countries such as Germany and China.

Build a motorized bicycle is a project that you can make yourself in a few simple steps.

First, find a bike that is in good condition. Indeed, the engine will add an extra burden on bicycles. The bike must have a career. This is where the connected battery.

The second thing you need to have batteries and battery. The bicycle with engine requires a battery 24 or 36 volts. The battery must have a charger to charge the batteries when they are low.

When buying a motor bike it is necessary to strictly necessary to buy a motorcycle. The engine must have a toothed wheel of a car. Most engines come without a bike sprocket. This engine requires a lot of changes to speed and can break after a short time. Size of the electric motor gear must match your bike.

The second part of the equipment necessary for cycling the accelerator. The steel plate 1 / aluminum bicycle chain and one speed. After gathering all the necessary equipment, you can connect to the bike. Connect the throttle. The engine is also associated with the controller. Using a cable, connect the battery to the controller.

After connecting all the parts, roll throttle check whether the engine is running. If the engine is ready to be attached to the bicycle.

The motor is permanent on the bicycle triangle frame. The motor is connected with the sprocket in order to power the bicycle. These bikes are currently very expensive and will save a lot of money, if you are able to build for you. You can hire a local mechanic to help motor connection.

Moto is still classified as a bicycle when the driver must obey the rules and safety measures established for bicycle users. You should also be careful when you drive to maintain the safety of passengers in mind.

The post EXHIBITION STAND DESIGN & SETUP FOR BICYCLE-FAIRS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-bicycle-fairs/

EXHIBITION STAND DESIGN & SETUP FOR BEAUTY-TRADE-FAIRS-AND-EXHIBITIONS

Pixelmate Exhibits & Designs caters to the beauty industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Beauty industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

Beauty is a phenomenal concept that is as old as mankind. However, it is a concept that is very wrong. Different people hear different opinions about what beauty means that many end up confused, frustrated and frankly resignation. If someone walks up to you and asked you to define beauty; what about you? Can you describe the pattern coverage is seen in one of the popular magazines, or colors of the rainbow? Or should consider melodic piece of music or even a romantic verse lover? All this can be defined in the concept of beauty, but one thing is clear, there is no definitive definition of beauty. Beauty is abstract and intangible. There is something about something. This is something a little different from one individual to another.

A popular definition of beauty is that it is characteristic of something that gives a sense of pleasure and satisfaction. So, beauty is perceived, it should stimulate the senses to evoke a sense of joy, pleasure and satisfaction. In this definition, a judge of beauty is a person who receives or does not receive pleasure.

The post EXHIBITION STAND DESIGN & SETUP FOR BEAUTY-TRADE-FAIRS-AND-EXHIBITIONS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-beauty-trade-fairs-exhibitions/

EXHIBITION STAND DESIGN & SETUP FOR BATTERY-TRADE-SHOW

Pixelmate Exhibits & Designs caters to the battery industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Battery industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

Firstly, let’s define the kind of batteries we are talking about. According to materials and technology used for the production of batteries, there are lithium ion batteries, lead-acid batteries, nickel metal hydride batteries, and cadmium. Of course, there are many other types of batteries, but the above are very common and most widely used.

Lead acid batteries are truly significant. These batteries are used in computer data station, power cars, forklifts and other products that require high power voltage. These batteries are not appropriated for products with low power voltage because the battery is intended to work in situations that require a lot of energy. Like most batteries have a serious equivalent letters as double stacks “A” batteries, you will discover that a lead acid battery is awarded the autograph of “A“ it. So if you spot a thing that involves the use of a battery you need to know that it’s the lead acid battery that will power appliance. Currently there are two main types of batteries. These batteries are useful, for example, at a time when power was reduced for several reasons. Currently, lead acid batteries can be categorized into two major type. This battery can be used to cover up for power outage when there is an emergency to produce the lights that is required.

Lithium batteries and lithium are the main providers of instant energy. The common use of lithium batteries can be seen in common customer products, such as portable radio. These batteries are also used in normal operation of electric car and hybrid electric cars too. Items that are commonly powered by lithium include computers, radio, stereo, torches and even touch light. Although the battery of these devices can vary in size there is one similarity.

Although you can buy several types of batteries for various devices you can find it cheaper to buy a battery that can be recharged to full potential. To assist to cope with the demands that these organizations can put lithium ion batteries through, a newer version has been developed. The new lithium ion battery called lithium polymer cells. To ensure that the lithium ion battery can be used for various devices, you’ll find that the battery is produce in several different shapes and sizes. While regular use of lithium ion battery is consumer electronics, you will see that you may use these batteries for normal electric car and hybrid electric cars.

The post EXHIBITION STAND DESIGN & SETUP FOR BATTERY-TRADE-SHOW appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-battery-trade-show/

EXHIBITION STAND DESIGN & SETUP FOR BAKERY-TRADE-FAIRS

Pixelmate Exhibits & Designs caters to the bakery industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Bakery industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

The bakery is a place that almost everyone has visited at one time or another. This is where you can get delicious pastries, cakes, biscuits, bread, cookies and even sandwiches! We can buy cakes for birthdays, wedding and graduation parties. However, if you are the one who counts calories, it is best to avoid persistent visits to the bakery.

There are generally two form of bakery: retail bakery and wholesale bakery. wholesale bakery is the type of bakery where production of bread, cake, and other bakery goodies are being produce on a large scale for distribution purpose, Generally, there are many people who bake and manufactured foodstuff after the hygiene standards set by the Government are being strictly followed. The requirement for wholesale bakery is not the only factory; there are even small family enterprises that run large bakery. These family businesses are mainly in the cities and small towns in which they provide in the stores of bread and food in town.

Retail bakery is somewhere usually visited for buying baked goods; we can select from the different type of bakery items. The most popular bakery are the French bakery and Italian bakery because they are the world famous for their bread.

For one to really begin to operate a bakery, the purchase of equipment and supplies necessary for the bakery operation is essential. Then, of course, for the bakery to operate successfully the owner of the bakery must have some knowledge of the bakery management course, the cheapest and simplest to start a bakery is to buy a bakery which they already put for sale, because you will have at least some of the required tools to commence a bakery operation.

Number of bakers who is entering the bakery is industry slowing and plant bakery within a few years will find the benefits of significantly reduced. Small bakeries employ more staff than what the big bakeries gathered together large bakery can be making use of few people for production, but they produce more products. Some bakeries employ 2-10 staff can produce breads that have more flavor, crumb texture and better crust color. They can do this bread on a daily basis giving its customers a product with much cooler and more attractive. Manufacturing 280 pounds of flour in making dough within few minutes. To do this, it creates a lot of heat. The heat that would otherwise kill yeast, as result frozen water must be be used without actually freezing.

The post EXHIBITION STAND DESIGN & SETUP FOR BAKERY-TRADE-FAIRS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-bakery-trade-fairs/

Friday 24 March 2017

EXHIBITION STAND DESIGN & SETUP FOR AUDIO-TECHNOLOGY-TRADE-FAIRS

Pixelmate Exhibits & Designs caters to the audio technology industry in the trade fair and stand setup we have unique designs for this industry and we cater to them and provide all kind of support and solution required to make them stand out of the clutter, we cater not only to the fortune 500 but to the start ups and small and medium enterprise.

Audio technology industry companies can avail Pixelmate Exhibits & Design service by writing to them at info@pixelmateindia.com or logging on to their website www.pixelmateindia.com.

One stop solution to all your exhibition and trade fair needs.

Audio equipment is being used for reproducing and recording sound. Audio-visual material and equipment include both pictures and recorded sound. Digital auditory tape is a form of magnetic tape used to produce recording in digital form with high quality recording sound

Audio equipment is being used for reproducing and reproducing sound.

An audio engineer also normally refers to vocal engineer or recording engineer works on the recording and manipulating the record using electronic effect, equalization, mixing, electronic effect, reinforcement and reproduction of sound. Audio engineers task on the technical area of coding, the placing of pre-amp knobs, microphones, the setting of levels. Many audio engineers artistically use technologies to create sound for radio, television, music, and films, computer games and electronic products. Audio engineers also put up, sound test and do audio console using live sound mixing and a sound reinforcement system for theatre, music concerts, and corporate event and sports games.

on the other hand, the word “audio engineer” can also be describe as a professional engineer or scientist who holds a B.Sc or M.Sc who develop, builds and design new audio technologies functioning inside the studies of acoustical engineering.

Audio engineering bothered about the practical and creative area of sounds including music and music, as well as the expansion of new auditory technologies and improving scientific knowledge of audio sound.

Audio engineers in research and development create new technologies, techniques and equipment to improve the procedure and art of audio engineering. They shape algorithms for audio signal processing and design acoustical simulations of rooms, carry out research on audible sound for video game console manufacturers specify the necessities for public address system, and other advanced area of audio engineering. They can also be described as acoustic engineers.

Audio engineers in research and development can come from educational backgrounds such as computer science, acoustics, electronics, electrical engineering, physics, broadcasting engineer, and acoustical engineering. Audio engineering courses at college or university or college fall into two major categories: training in science or engineering topics ,training in the creative use of audio as a sound engineer, which then enable students to relate these ideas while pursuing a vocation mounting audio technologies. Audio education courses give you a good information of technologies and their function to sound reinforcement system and recording studio, but do not have enough scientific and content to enable you to a acquire job in research and development in the acoustic and audio industry.

The post EXHIBITION STAND DESIGN & SETUP FOR AUDIO-TECHNOLOGY-TRADE-FAIRS appeared first on Pixelmate Exhibits & Designs.

source http://www.pixelmateindia.com/exhibition-stand-design-setup-audio-technology-trade-fairs/